He received the notification and now he wonders why one needs to do this 40 year inspection. You may also wonder why you have to spend your hard earned money to do this. The answer is reduced to one word. That word is "security."
Throughout the years, buildings in South Florida (namely in Broward and Dade counties) undergo changes. Indeed, the ravages of time take its toll and the structures weaken. Additionally, some building owners make certain alterations to buildings that are not permitted and therefore “illegal”. Naturally, as time goes by, conditions can worsen to a point where the structure becomes dangerous and even life-threatening.
These 40 year inspections are required by law and are enforced in order to keep buildings safe. These inspections contain a list of certain items that must be investigated and checked. Of course, the list will include items that can be life-threatening such as a faulty electrical system or serious structural damage. The 40 year inspection requirements do not put emphasis on items such as leaks and a bad paint job. No one has ever died because of a leak or by living in a purple-and-orange building.
What are the steps I must follow to carry out?
On the surface, the inspection is rather simple. If you look at a blank 40 year report, you’ll notice that it is basically a fill-in-the-blank form. This form also includes areas where the inspector can check off items and adds information about the property being inspected.
Although seemingly straightforward, it takes an experienced professional to perform the inspection. That person must carefully inspect the property and properly identify the problems. The inspector can also provide you with valuable feedback as to the best way to perform the repairs. At the most basic, a 40 year recertification involved two types of inspections – an electrical inspection and a structural inspection.
On the electrical side, the inspector typically goes to the electrical room and inspects the main electrical components. These components include items such as panels, main breakers, main feeders, gutters and the entry from the FP&L transformer. Obviously, a bad electrical installation can be a dangerous thing because people can get electrocuted or there can be a fire.
On the structural side, the inspector analyzes the main structural components of the property. These items include the foundations, beams, columns, slabs, and roof. Much of the inspection is visual in nature. Obviously, the inspector is looking for visible signs of stress such as cracks, spalls, and deflections in these members. An experienced inspector can tell the difference between a serious crack and one that does not pose a structural problem. We have added a blog page that provides tips on hiring your inspector.
One can download a sample of a blank report by clicking HERE. However, please note that some cities like to use their own special forms. Therefore, please ask your Building Department for the correct form. Despite this, all the forms are basically the same from city-to-city.
What should I do when I receive the notification?
For starters, you must hire a licensed professional as mandated by law. In short, the hiring of an inspector would basically be the same as hiring a plumber or an accountant. Naturally, you can ask around for references or use your common sense and shop around.
Your licensed professional will be the person that will not only do the inspection but will also guide you through the steps needed to get your building certified. Notably, some buildings will pose difficult challenges and others will not. We cannot stress enough the importance of an experienced professional in your corner when it comes time to perform the 40 year recertification.
Keep in mind that the single most important thing you can do at this initial time is to hire the right professional. You should invest some time by investigating the person and the company. You should also make sure that they are properly licensed and insured. Moreover, you should ask if they have Errors and Omissions insurance since this is the hallmark of a serious and established engineering company.
A 40 year recertification does not have to be convoluted if you hire the right people. Additionally, the folks at the Building Departments are typically very helpful when you ask them for help. At the end of the day, we all want the same thing…buildings that are safe for our tenants, friends, residents and the public in general.
Do you need to hire a suitable professional? Hire G. Batista & Associates
If you are looking at other companies that provide this important inspection service, ask them…
Do they provide the Structural AND Electrical inspection and expertise IN-HOUSE?…. We DO!- This keeps our costs low since we don't have to subcontract these services to others.
Do they provide a list of repairs (if needed) included in the same price?…. We Do!
Do they provide IN-HOUSE structural and electrical professionals that can provide recommendations for repairs (if needed)?… We Do!
Have they been performing these inspections for more than a decade?… We Have!
Do they have a long list of Satisfied Customers which can be called as a referral?… We Do!
Do they have full-time certified inspectors and full-time Professional Engineers on Staff?… We Do!
INSPECTION PROFESSIONAL ASSOCIATIONS:
IHINA - Independent Home Inspectors of North America
FABI - Florida Association of Building Inspectors
NACHI - National Association of Certified Home Inspectors
ASHI - American Society of Home Inspectors