Concrete Repair and Concrete Restoration

Broward, Dade, and Palm Beach Counties in South Florida


Concrete repair is a fact of life for an old building.    This is especially true for buildings in South Florida.  The "salt air" is the main reason for this concrete failure.   To put it another way, the chlorides in the air make their way into the concrete.  Consequently, the rebar inside the concrete rusts and expands.  As a result, the concrete cracks and ruptures.  This breach is called a "spall".   These spalls are considered a failure and can lead to a collapse.  For this reason, Cities and Counties in South Florida take these matters very seriously.


Other serious issues

This includes waterproofing, roofing, and electrical items. In order to maintain our buildings safe, Cities have required that buildings undergo a 40 Year inspection. Nevertheless, the most costly repairs are typically those related to the concrete restoration. Thus, hiring the right person to help you is critical if you want to do things right the first time.


Our Capabilities

Over the years, we have performed concrete restoration projects in South Florida. Therefore, we know what your main concern is - cost. Our company is focused to prepare you for what is potentially a long, complicated, and costly process. Our in-house engineers and managers can provide you with the best road map to a successful project.


Why hire G.Batista & Associate?

GB&A has both seasoned and licensed Engineers and Contractors on staff. We are not only an established and well-known engineering firm that specializes in concrete repair, but we also have our in-house construction team. Additionally, we are licensed and bonded to $20,000,000.

Other Concrete Repair Services Provided:

Structural Repairs:

Epoxy Injection – This is a procedure where voids are filled in cracked and broken concrete.

Spall Repair & Rebar Replacement – In this procedure, we cut out a spalled area of concrete and clean the rebar inside.  Consequently, we use special materials and techniques to fill the void back to create a better and stronger structure.

Removal and Replacement of Deteriorated Concrete – Sometimes concrete is beyond repair and needs to be removed and replaced.

Repairs On Grade – This is a process that stabilizes concrete slabs by pressure grouting beneath the concrete slab

Anchoring Delaminated Masonry Back to the Substrate – This is a process that reattaches masonry (or veneer walls such as brick) to either concrete and/or hollow concrete block.

Expansion & Control Joint Repair/Installation:

Removal & Replacement of Existing Deteriorated Joint Material – In this scope of work, we remove any failed joint material.  We then proceed to clean and prime the existing joint. Finally, we install new backer rod and sealant.

Repair of Deteriorated Joint Nosing – Here, we cut out and remove the worn and/or spalled joint nosing and rebuild to the original configuration.

Concrete & Masonry Coatings:

Epoxy, Polyurethane, Acrylic & more – There are many coating systems on the market including Vehicular & Pedestrian Traffic Coating Systems.  These systems are designed for Wear, Chemical Resistance,  Aesthetics, and Waterproofing.

Waterproofing & Water Control:

Polyurethane Injection – This system is used where water is coming through cracks as in a basement.

Coatings and Waterproofing Systems -  There are many waterproofing systems on the market. Some are better than others. Some are much more expensive than others.  Hire a professional like G. Batista & Associates to help you make these decisions.

Concrete repair manual

Free-For a Limited Time!

Click here for a free copy of the "Concrete Restoration for South Florida" Manual. This booklet is tailor-made for those that have little or no experience in concrete repair. Please note that this is a 40-page book made in PDF format. Thus, it may take a few minutes to download.

Basic terms about what concrete repair is, how it begins and how to remedy it.

Ready to find out more? Contact us for a quote!